Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Phoenix
Duct repair and sealing in Phoenix typically costs $280-$850 for most residential jobs, with full-system resealing on older homes running toward the higher end. We dispatch from our Phoenix office and serve neighborhoods from Maryvale to Arcadia, Ahwatukee to Deer Valley. Call (480) 500-6377 for a written estimate before any work starts.
Phoenix’s housing stock is dominated by single-story stucco ranch and tract homes built between the 1970s and early 2000s, almost all with air handlers and flex ductwork in attics rather than basements - which don’t exist here due to caliche hardpan and construction norms. Those attic spaces hit 150-160°F in summer. Mastic cracks. Flex separates at boots. Dust from the attic cavity itself gets pulled into living spaces. Our Duct Repair & Sealing crews see this pattern weekly, and we document every gap with photos before touching a sealant gun.
Why CleanRun Air Duct Cleaning Phoenix Is Phoenix’s Preferred Duct Repair & Sealing Company
We’ve served Phoenix since 2013 with one rule: written price before work starts, every time, under Haven Standard Clause 1. No “call for a quote.” No per-vent bait-and-switch. Over 52,000 homes later, every job still ends with a Documented Photo Record of every duct run - before and after - delivered to the customer as a standard deliverable, not an upsell.
Our technicians are background-checked, uniformed, and identified by name before arrival - Haven Standard Clause 3: Verified Crews. They operate from a local equipment roster including Rotobrush agitation systems, Abatement Technologies negative-pressure extractors, and Guardsman sealants. Customers can look up every brand independently. The 365-Day Done Right Promise is backed in writing on every job, not just stated in marketing copy. If it’s not right, we make it right.
We also offer a Free Second Opinion on any written estimate from a competitor. Bring us their number. We’ll put ours next to it in writing. No charge.
Our Duct Repair & Sealing Services in Phoenix

Duct Sealing
Phoenix’s 9-month AC runtime plus July-September haboob dust means duct failures appear earlier and differently than in milder metros. Attic air handlers and flex runs bake at 150-160°F, so we regularly find separated register boots and dust infiltration from the attic cavity - not just clogged ducts. This combination of year-round system cycling and monsoon particulate makes duct sealing here more urgent than virtually anywhere else in the US. We seal with mastic and foil tape rated for extreme thermal cycling, then photograph every joint before and after.

Flex Duct Repair
In the large 1980s-90s subdivisions across the East Valley - Gilbert, Chandler, and older parts of Scottsdale - decades of thermal cycling between extreme attic heat and cooled interior air have caused flex duct to sag and partially separate at register boots. A cleaning job that would be straightforward in a milder-climate city often requires resealing disconnected duct sections before the system can even be properly pressurized. We replace crushed or torn flex with new insulated runs, support sagging sections with proper straps, and reconnect at the plenum with mechanical fasteners plus mastic.

Metal Duct Repair
Older Phoenix homes, particularly pre-1990 builds in central corridors near Camelback Road and Indian School Road, still have galvanized metal trunk lines. The extreme aridity here means dust doesn’t clump; it abrides metal seams over years of continuous airflow. We spot-weld separated seams, replace rusted sections (rare but present in homes with past roof leaks), and seal all connections with high-temperature mastic rated for Phoenix attic conditions.

Duct Insulation
When attic temperatures regularly exceed 150°F, uninsulated or degraded duct insulation becomes a major efficiency loss. We install foil-faced fiberglass insulation with proper vapor barriers, sealed at all seams, to reduce thermal gain in supply runs. This matters in Phoenix more than most markets because cooled air travels through attic spaces for 30-50 feet in many ranch layouts. The work is photographed before and after, with thermal imaging available on request.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Phoenix
CleanRun stocks parts and sealants from Aprilaire, Abatement Technologies, Guardsman, and Rotobrush - professional-grade equipment customers can verify independently before agreeing to any price. We don’t show up with hardware-store tape and hope for the best. For Phoenix’s thermal extremes, we specify mastic and hardware rated for sustained 180°F exposure, not standard national products that crack in Sonoran summer attics. Parts availability is local; most repairs don’t require ordering delays.
Common Duct Repair & Sealing Problems We See in Phoenix Homes

- Mastic seals around register boots dry out and crack after repeated 150-160°F attic heat cycles, creating open pathways for caliche dust to bypass filtration entirely. We find this in roughly 60% of pre-2000 Phoenix homes.
- Flex duct runs sag and separate at connections in East Valley subdivisions because decades of thermal expansion and contraction outpace the original installation hardware. The gap pulls unfiltered attic air directly into living spaces.
- Attic air handler cabinets and plenum connections degrade from extreme heat, allowing unfiltered attic air to bypass the filter and coat the blower motor and coils with fine desert silt. This reduces system lifespan and raises energy bills.
- Because Phoenix residents seal homes and run AC almost continuously from March through November, there is virtually no seasonal window-open period to flush indoor air. Desert dust, pollen from irrigated ornamental landscaping, and monsoon particulate recirculate through ducts for months without relief.
Pricing for Duct Repair & Sealing in Phoenix, AZ
A typical register boot resealing in Phoenix runs $280-$420. Partial flex duct replacement on one run: $340-$580. Full-system mastic resealing on a 1,600-2,400 square foot ranch: $620-$850. Metal trunk line spot repair: $450-$780 depending on access and material gauge.
What moves the number: attic accessibility (truss spacing, existing insulation depth), extent of separation or crush damage, and whether the air handler plenum itself needs resealing. Every quote is itemized in writing before work starts - Haven Standard Clause 1. No per-vent pricing. No post-arrival upsells.
We also offer a Free Second Opinion on any competitor’s written estimate. Bring it in. We’ll put our number beside it.
| Service | Typical Range (Phoenix) |
|---|---|
| Register boot resealing (1-3 boots) | $280-$420 |
| Single flex duct run repair/replacement | $340-$580 |
| Full-system mastic resealing | $620-$850 |
| Metal trunk line spot repair | $450-$780 |
| Duct insulation replacement (per run) | $180-$320 |
We Also Serve Cities Near Phoenix

Our crews dispatch from the Phoenix office to Phoenix proper plus Glendale, Tempe, Paradise Valley, and Scottsdale. The same written-price guarantee, same documented photo record, same Haven Standard applies across the entire service area. Scheduling is coordinated locally; you’re not calling a national dispatch center.
Serving Phoenix, AZ - Our Local Coverage Area
We’re based in the Phoenix area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Duct Repair & Sealing in Phoenix

Because cleaning sealed ducts is effective, but cleaning ducts with open gaps is temporary. In Phoenix’s 150-160°F attics, mastic cracks and flex separates, so the blower pulls in new contamination from the attic cavity faster than cleaning can remove it. We photograph the gaps to show you. Sealing first, then cleaning, is the only sequence that lasts. Call (480) 500-6377 and we’ll show you what’s open in your system.
On a 1980s Gilbert ranch near Val Vista Drive, our tech found a flexible duct run that had partially separated at a register boot after years of extreme attic heat; camera inspection showed the gap was pulling in dusty attic air every time the blower kicked on. We resealed the boot with mastic, reconnected the run, and then used negative pressure and HEPA filtration to clean the supply and return ducts with Rotobrush agitation tools before verifying airflow at every register. This pattern - separated boots, sagging flex, degraded plenum seals - is standard in Phoenix’s older housing stock.
Yes. July through September haboobs force fine caliche particulate directly into return-air intakes, and with AC running continuously, that contaminated air cycles through ductwork day and night. If your ducts have gaps, monsoon dust enters the living space at the highest concentration of the year. Sealing before monsoon season is the single most effective preparation. Call (480) 500-6377 for an inspection and written estimate.
Yes, and we specify materials rated for those conditions. Standard flex duct tape fails in Phoenix attics; we use mechanical fasteners plus high-temperature mastic. The work is scheduled during morning hours when possible, and our crews carry hydration and heat-safety equipment per Haven Standard protocols. The repair itself is documented with before-and-after photos of every connection.
We verify with three documented checks: visual inspection of every sealed joint with photo record, airflow measurement at every register compared to pre-repair baseline, and pressure testing where indicated. The customer receives the photo record as part of the standard job deliverable. If airflow doesn’t improve, we don’t consider the job complete. The 365-Day Done Right Promise means we’ll return if performance degrades. Call (480) 500-6377 to schedule.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Phoenix, serving Phoenix since 2013.




Before
After
Before
After